AMES, Iowa — The Iowa Department of Transportation is warning that the state is seeing an increase in crashes involving commercial vehicles and trains, including incidents in which drivers have gone through activated railroad crossing gates and struck trains.
The warning came Thursday from Iowa DOT Rail Director Amanda Martin as the agency prepared for national See Tracks? Think Train Week, scheduled for Sept. 21 through Sept. 27.
“Iowa is seeing an uptick in commercial vehicle versus train incidents where folks are driving through the railroad signal gates and into the side of trains,” Martin said.
Martin said distracted driving is a suspected factor in some of those incidents, although Iowa DOT did not release individual crash-investigation findings establishing distraction as the cause of every commercial vehicle collision.
The warning is particularly significant for truck drivers because railroad crossings present a combination of risks unique to commercial vehicles: longer stopping distances, vehicle length, low-clearance concerns, slower acceleration and the possibility that a tractor-trailer may not completely clear the tracks before a train arrives.
Iowa Recorded 40 Railroad Incidents in One Year
Iowa DOT said the state recorded 40 railroad-related incidents between July 1, 2025, and June 30, 2026.
Those incidents included crashes at railroad crossings, incidents occurring between crossings and trespasser-related events.
Five of the 40 incidents, or 12.5%, were fatal, while 25% resulted in injuries, according to Iowa DOT.
The agency did not state that all 40 incidents involved commercial motor vehicles.
Instead, DOT separately highlighted what it described as an increase in commercial vehicle-versus-train incidents as one of the safety concerns prompting its warning.
Active Crossing Gates Are Not Eliminating the Problem
One of the more notable details in Iowa DOT’s announcement is that collisions continue occurring even at crossings equipped with warning systems.
The department said that during the previous year:
17 railroad incidents occurred at passive crossings, where motorists generally rely on signs and crossbucks rather than active warning devices.
Another five incidents occurred at crossings equipped with flashing lights, and five occurred at crossings equipped with both flashing lights and gates.
For commercial drivers, that means the presence of active warning equipment does not eliminate the need for careful approach and clearance decisions.
Martin specifically warned drivers not to assume they understand a train’s schedule or speed.
Freight trains do not operate on predictable public schedules, and their operating speed may change depending on railroad conditions and traffic.
“If You Don’t Fit, Don’t Commit”
Iowa DOT emphasized a basic rule that has particular importance for tractor-trailers:
A driver should not enter a railroad crossing unless there is enough space on the opposite side for the entire vehicle to completely clear the tracks.
The agency summarized that guidance bluntly:
“If you don’t fit, don’t commit.”
That issue can become especially dangerous when traffic backs up beyond a crossing.
A tractor may successfully cross the rails while the trailer remains within the railroad’s path because traffic ahead prevents the vehicle from moving farther forward.
Federal Railroad Administration safety guidance similarly warns drivers never to begin crossing unless they can completely clear the tracks without stopping. FRA maintains a national database of railroad crossing and accident information used by regulators and transportation agencies.
What Drivers Should Do if a Truck Becomes Stuck
Iowa DOT also reminded commercial drivers about the blue-and-white Emergency Notification System, or ENS, signs installed at railroad crossings.
If a truck stalls or becomes stuck on the tracks, the driver should:
Get out of the vehicle immediately.
Move away from the tracks.
Locate the blue-and-white ENS sign.
Call the telephone number shown on the sign and provide the crossing identification number.
The ENS system allows railroad dispatchers to be notified directly so train crews can be warned about a blocked crossing.
Drivers should not remain in a disabled truck attempting to restart or move it while a train approaches.
Large Trucks Face Unique Crossing Risks
Railroad crossings can pose additional challenges for commercial vehicles because of trailer length and vehicle geometry.
A tractor-trailer may require significantly more time and roadway space to cross than a passenger car.
Low-clearance trailers can also become hung up at crossings where the roadway profile rises sharply over the tracks.
Certain commercial vehicles, including some buses and vehicles carrying hazardous materials, are subject to additional federal railroad-crossing requirements.
The Federal Railroad Administration maintains crossing inventories and accident records covering thousands of public and private crossings nationwide.
Recent NTSB Investigation Highlights Truck-Train Risk
The Iowa warning also comes as the National Transportation Safety Board continues investigating a separate August collision between a Coca-Cola tractor-trailer and a CSX freight train at a private railroad crossing in College Park, Georgia.
According to the NTSB’s preliminary information, the truck was maneuvering near a loading area when its front end remained within the railroad track clearance zone as a train approached at approximately 5 mph.
A conductor riding the lead railcar was seriously injured, while the truck driver suffered minor injuries.
The NTSB has not determined probable cause in that case, and all aspects of the crash remain under investigation.
The Georgia collision occurred at a private crossing equipped with a crossbuck but no active gates, bells or flashing lights.
It provides a separate example of the risks posed when commercial vehicles and trains occupy the same crossing area.
Iowa DOT Says Drivers Are Taking Dangerous Chances
Martin urged drivers not to attempt to beat approaching trains or bypass crossing gates.
“Trying to beat a train, going around the gates, or being distracted can change your family’s life forever,” she said.
For professional drivers, Iowa DOT’s warning is notable because the agency is specifically identifying commercial vehicle-train collisions as an increasing concern rather than discussing railroad safety only in general terms.
The department has not yet released a detailed breakdown identifying the number of commercial trucks involved, the carriers involved or the individual circumstances surrounding each collision.
TWOSU News will continue monitoring Iowa DOT, the Federal Railroad Administration and NTSB for additional commercial-vehicle crossing data.
